|
|
|
|
Vr0 |
Distant Signals or Vorsignale usually signals the situation expected in the next block of operation. Signals located at or near stations with turnouts/crossings. | Caution! You must be prepared to stop in the next block ahead. |
Vr1 |
Distant Signals or Vorsignale usually signals the situation expected in the next block of operation.Signals located at or near stations with turnouts/crossings. | Prepare to proceed into next block. Block is expected to be clear ahead of traffic. |
Vr2 |
Distant Signals or Vorsignale usually signals the situation expected in the next block of operation.Signals located at or near stations with turnouts/crossings. | Caution! Prepare to proceed slowly when you enter the next block ahead. |
Sh0 |
Yard Signals or Sperrsignale are used to control yard activity such as shunting in a station or yard. | Shunting Stop. Train must stop shunting operation and may not continue until signal clears. |
Sh1 |
Yard Signals or Sperrsignale are used to control yard activity such as shunting in a station or yard. | shunting operations now allowed! Proceed with operations. |
Hp0 |
Home Signals or Hauptsignale are used to control the operation in the immediate block ahead in which the train is entering. These are unlike distant signals which signal you to prepare to perform an operation. These signal direct you to peform an immediate action, i.e., Stop!, Go! Slow!. | Halt! Immediately stop your train and do not proceed into block until cleared to do so by the same signal. |
Hp1 |
Home Signals
or Hauptsignale are used to control the operation in the immediate block
ahead in which the train is entering.
These are unlike distant signals which signal you to prepare to perform an operation. These signal direct you to peform an immediate action, i.e., Stop!, Go! Slow!. |
Proceed to enter block. Maintain proper speed. |
Hp2 |
Home Signals
or Hauptsignale are used to control the operation in the immediate block
ahead in which the train is entering.
These are unlike distant signals which signal you to prepare to perform an operation. These signal direct you to peform an immediate action, i.e., Stop!, Go! Slow!. |
Proceed slowly into block. Use caution when entering block. |
Hp00 |
Home Signals
or Hauptsignale are used to control the operation in the immediate block
ahead in which the train is entering.
These are unlike distant signals which signal you to prepare to perform an operation. These signal direct you to peform an immediate action, i.e., Stop!, Go! Slow!. |
Train must stop immediately and also any shunting operations are forbidden. Do not enter the block protected by this signal! |
Hp0/Sh1 |
Home Signals
or Hauptsignale are used to control the operation in the immediate block
ahead in which the train is entering.
These are unlike distant signals which signal you to prepare to perform an operation. These signal direct you to peform an immediate action, i.e., Stop!, Go! Slow!. |
Train must stop immediately and not enter the block protected by signal. This signal also indicates that shunting operations are now allowed in the block protected by signal. |
|
© Copyright 1997-2004 Reynauld's
Euro-Imports Incorporated. All rights reserved. No portion of this website
may be copied without prior written permission of Reynauld's Euro-Imports,
Inc. All prices subject to change without prior notice.
|
